Wiring in slim line fans with override switch

[silverzx]

Right, the 3 pin plug on the radiator is how this works...

IIRC from when I've done this before, the high/low speed is controlled by 2 being the common and it switching 1 for the low speed, then high speed is activated by it switching pin 3 - so basically, take that plug and all you should need to do is to put in your own switch which links the wires to pins 2 and 3 on that plug, use the stock relay and take the wires that go to the stock fans and wire in your slimlines

That's totally from memory, so I'd strongly suggest testing this before doing it!

Hehe Ruan, ive already expained near enough word for word what you just said to Trent

Center is common, sides are low / high, just leave oem system alone and switch them simples

Come on trent

Dum dum dum.

   

Ok, I'll pull my finger out.

Thanks!