04-12-2014, 05:33 PM
http://www.ebay.co.uk/itm/METAL-EXHAUST-...338a9bb1b8
This sheet is slightly too small, (300mm long) but it should be possible to find similar. Perforated metal gasket material seems fairly common.
Then you could just drill the holes in it yourself and cut the edges?
If you're going to be paying someone else to do it and they're providing materials they are charging less than 50 quid for their labour which doesn't sound at all unreasonable.
Why does it need to be so thick?
This sheet is slightly too small, (300mm long) but it should be possible to find similar. Perforated metal gasket material seems fairly common.
Then you could just drill the holes in it yourself and cut the edges?
If you're going to be paying someone else to do it and they're providing materials they are charging less than 50 quid for their labour which doesn't sound at all unreasonable.
Why does it need to be so thick?
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
62k Diablo Phase 1 Gti-6: Project Thread