03-10-2014, 10:52 AM
okay so.... for the pug oil filter and fuel filter you can get those from Euro Car Parts or GSF. Same company. Will be cheaper than pug and are just as good.
Crosland Fuel Filter Part No.: 503735058 - £5.88
Crosland Oil Filter Part No.: 501735048 - £2.34
The pbushes on the 306 are wank. You can get roller ones at the cost of hundreds but a better alternative to the original ones is the P Bushes from a peugeot partner. They are a better design. Peugeot wouldnt sell them seperately to me.
this is an original 306 one... http://www.ebay.co.uk/itm/Peugeot-306-Pa...5d45128719
and this is a partner one http://www.ebay.co.uk/itm/VECO-SUSPENSIO...19d39cce10
get the partner one. Not sure if they are cheaper anywhere else.
When you fit them make sure you use threadlock on the bolts. Use new bolts if possible.
To fit replacement p bushes to the wishbone you need to cut the old ones off. Be careful not to go through the shaft of the wishbone. Then putting the new ones on requires pressing on. I put my wishbones in a vice and then used a large socket and mallet to get mine on.
Also note that when you cut the old bushes off the black rubber goes everywhere. I put my trousers in the wash afterwards and the rubber came off and stained the rest of the wash... not a good move.
good luck!
Crosland Fuel Filter Part No.: 503735058 - £5.88
Crosland Oil Filter Part No.: 501735048 - £2.34
The pbushes on the 306 are wank. You can get roller ones at the cost of hundreds but a better alternative to the original ones is the P Bushes from a peugeot partner. They are a better design. Peugeot wouldnt sell them seperately to me.
this is an original 306 one... http://www.ebay.co.uk/itm/Peugeot-306-Pa...5d45128719
and this is a partner one http://www.ebay.co.uk/itm/VECO-SUSPENSIO...19d39cce10
get the partner one. Not sure if they are cheaper anywhere else.
When you fit them make sure you use threadlock on the bolts. Use new bolts if possible.
To fit replacement p bushes to the wishbone you need to cut the old ones off. Be careful not to go through the shaft of the wishbone. Then putting the new ones on requires pressing on. I put my wishbones in a vice and then used a large socket and mallet to get mine on.
Also note that when you cut the old bushes off the black rubber goes everywhere. I put my trousers in the wash afterwards and the rubber came off and stained the rest of the wash... not a good move.
good luck!