03-08-2014, 11:20 AM
(This post was last modified: 03-08-2014, 11:22 AM by rocker8742.)
If its a universal one from ecp etc with a slbit that screws onto the cable at the throttle end then you need to cut the cable to length before you screw the end on otherwise the pedal won't spring back
![[Image: du5uba4y.jpg]](http://img.tapatalk.com/d/14/08/03/du5uba4y.jpg)
This is the part I'm on about, if you left it at the length it came at there will be a lot of slack in the cable and it won't spring back
If you wedge the throttle pedal fully up (off) then pull the cable as far as it will go at the TB you'll see how much you'll need to cut
This is the part I'm on about, if you left it at the length it came at there will be a lot of slack in the cable and it won't spring back
If you wedge the throttle pedal fully up (off) then pull the cable as far as it will go at the TB you'll see how much you'll need to cut
![[Image: sig2_zps5d67efb7.jpg]](http://i1133.photobucket.com/albums/m598/rocker8742/sig2_zps5d67efb7.jpg)