14-07-2014, 07:55 AM
Just sack off that relay, looks like a right lash up.
The glow plug relay (big relay you can see there bolted behind the battery, unplug the connector with lots of wires going into it, and find the wire that is live with the ignition on (use a multimeter / bit of wire to a test light or something) , once you have founded the one that is ONLY live with ignition on and goes dead when its off (and make sure it STAYS live for more than 20 seconds as one of them is the glow plug light wire) simply run a wire from that wire to the solenoid and your away. For the sake of confirming this is your issue, connet a wire from the stop solenoid, get someone to hold one end on the positive battery terminal, you should here it "click" as you connect it, then fire it up...
The glow plug relay (big relay you can see there bolted behind the battery, unplug the connector with lots of wires going into it, and find the wire that is live with the ignition on (use a multimeter / bit of wire to a test light or something) , once you have founded the one that is ONLY live with ignition on and goes dead when its off (and make sure it STAYS live for more than 20 seconds as one of them is the glow plug light wire) simply run a wire from that wire to the solenoid and your away. For the sake of confirming this is your issue, connet a wire from the stop solenoid, get someone to hold one end on the positive battery terminal, you should here it "click" as you connect it, then fire it up...
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
| #DervMafia |