31-05-2014, 05:46 PM
Right so i've spent the last hour taking each wheel off, checked everything was as tight as it should be, checked for play in the driveshafts of which the O/S had none and the N/S had the tiniest amount of movement. Took the brakes off to listen to each of the wheel bearings and they are all quiet and perfectly smooth. Also checked the bolts on the ream beam mounts and they are all as they should be.
I think i'm just going to replace both driveshafts and see what happens. I think the bearing on the O/S is going anyway because I can feel vibration through the pedals which gets worse with road speed not engine speed.
I think i'm just going to replace both driveshafts and see what happens. I think the bearing on the O/S is going anyway because I can feel vibration through the pedals which gets worse with road speed not engine speed.