23-04-2014, 11:35 AM
(This post was last modified: 23-04-2014, 11:36 AM by pug306driver.)
can you put up some pics as our hdi has bosch single piston slide calipers.........
get some g clamps and some wood spacers.......make sure the "free" moving piston is notr allowed to come out while you concentrsate on the stiff stuck one.
use wood to protedt the capile etc and a g clamp to push the free puiston fully home and clamp it there.
use similar to move stuck piston. the boot may be able to be moved aside a bit so some fliud in a surringe can be inserted ( no needle ) and lub the internals.
when the stuck piston has moved inwards, remove its clamp and use brake pedal to make it come out as much as you dare, BUT NOT ALL THE WAY OUT!!!!!!!.
repe4at repeat repeat till stiff piston free's off.
seals are available from big red I think ..............ar Peugeot parts....see exploded views on pug service box in guides..........hope thios helps as computer tiome out in 4 mins
don't bang the crap out of it you will break summut....pics back tommoprrow
get some g clamps and some wood spacers.......make sure the "free" moving piston is notr allowed to come out while you concentrsate on the stiff stuck one.
use wood to protedt the capile etc and a g clamp to push the free puiston fully home and clamp it there.
use similar to move stuck piston. the boot may be able to be moved aside a bit so some fliud in a surringe can be inserted ( no needle ) and lub the internals.
when the stuck piston has moved inwards, remove its clamp and use brake pedal to make it come out as much as you dare, BUT NOT ALL THE WAY OUT!!!!!!!.
repe4at repeat repeat till stiff piston free's off.
seals are available from big red I think ..............ar Peugeot parts....see exploded views on pug service box in guides..........hope thios helps as computer tiome out in 4 mins
don't bang the crap out of it you will break summut....pics back tommoprrow
