22-04-2014, 02:20 PM
(22-04-2014, 01:51 PM)powerandtorque Wrote: It's at the bottom of the center console, just below and back from the clock, hazard switches etc. Black plastic box about 3x4" or so.
You'll need to remove the lower center console (bit around the gear lever) and then there's three torx screws securing the BSI to the center console plastic/body. Remove them, unplug the wiring and then sort of wiggle it out of the hole just behind it and downwards into the footwell.
Are both cars three plug ECU's as I think W reg was around the changeover point from single to three plug ECU's?
Oh.Ill have to check that today. And also thanks for the help.
