23-03-2014, 10:25 PM
(23-03-2014, 10:21 PM)Niall Wrote: a) You don't want a 12v constant otherwise the gauge is always live and will drain the battery. Take a 12v switched from the stereo switched if you don't want to fit a proper switched live or tap into the ignition switched although personally id rather do it properly.
b)12v switched for lights - take this from the dash dimmer switch to the right of the wheel. If you don't have one, remove the blanking plate where it should be and you will find a connector with 4 orange cables. 2 on each pin. connect to any of these.
c) There is a earth point behind the throttle pedal.
Thanks mate, I knew id get a quick answer on here
the 12v constant is for the memory function on the dial (same as the stereo) so I suppose I could tap into the memory cable on the back of the head unit?