06-03-2014, 08:54 PM
Wanting a decent oil drain sorted for my turbo.
Atm I've used reinforced high temp silicon hose jubilee clipped to the block end and also onto a standard oil drain off the turbo.
Problem is turbo end always seems to leak - hose goes off, prob due to heat - and even with many hoseclips they tend to weep after a bit.
Ideally I'd go for an AN fitting turbo side - but can I then push fit this over the standard block fitting and jubilee? Or am having to drop the sump and drill and tap a new feed for the oil return?
Solutions please
Atm I've used reinforced high temp silicon hose jubilee clipped to the block end and also onto a standard oil drain off the turbo.
Problem is turbo end always seems to leak - hose goes off, prob due to heat - and even with many hoseclips they tend to weep after a bit.
Ideally I'd go for an AN fitting turbo side - but can I then push fit this over the standard block fitting and jubilee? Or am having to drop the sump and drill and tap a new feed for the oil return?
Solutions please
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}