Fuel pump drawings none starter problem

[mspdan]

Had the connector under the dash in and out, seemed ok connection wise and no. Urn marks/corrosion.

What relay is it in the fuse box? Like you say its great its running but id love to know where the problematic area is.

best way I suppose is to isolate area and check voltage and see where there is a drop in an area as that is what I did to isolate an area for it.

Work through systematically until you get a voltage change..

Im not saying it is the relay for the lp but top row second in from right relay (should be black or grey) but everytime I fiddled with wiring and had a probe in this it would beep and the car would start pumping again

hope this helps