06-02-2014, 08:51 AM
Right...
Rear beam sourced, this was originally on Nialls' 1.8 I believe, it's been stored outside for a while so it's got a fair share of surface rust and dirt!
I've stripped the caliper which was left on it and removed the brake discs too.
One thing I'm lost on is brake pipes. These are all corroded to shit, I had to cut a couple of them. Will the ones on my car need to be removed and re-fitted (system re-bled) or can I get away with leaving them all in situ whilst fitting the new rear beam?
How does it work?
![[Image: 5C2C572C-1B5A-4C32-8B80-3ED34A956FBB.jpg]](http://i430.photobucket.com/albums/qq25/chris_rx71/Mobile%20Uploads/5C2C572C-1B5A-4C32-8B80-3ED34A956FBB.jpg)
Rear beam sourced, this was originally on Nialls' 1.8 I believe, it's been stored outside for a while so it's got a fair share of surface rust and dirt!
I've stripped the caliper which was left on it and removed the brake discs too.
One thing I'm lost on is brake pipes. These are all corroded to shit, I had to cut a couple of them. Will the ones on my car need to be removed and re-fitted (system re-bled) or can I get away with leaving them all in situ whilst fitting the new rear beam?
How does it work?
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
![[Image: Sig500x130.png]](http://i430.photobucket.com/albums/qq25/chris_rx71/Sig500x130.png)