04-02-2014, 11:01 PM
The only problem with that is that MC you need to push, the cable would pull on it.
I still don't think this will fully solve the problem, you would either need to fit a slave cylinder like this
![[Image: 1203clt-14%2B5-speed-gearbox-install%2Bc...linder.jpg]](http://image.classictrucks.com/f/tech/1203clt_5_speed_gearbox_install/36702400/1203clt-14%2B5-speed-gearbox-install%2Bclutch-slave-cylinder.jpg)
or keep the cable and re-design the real problem, remove the nylon bushes holding the fork ,machine out the holes and fit some sealed bearings
I still don't think this will fully solve the problem, you would either need to fit a slave cylinder like this
or keep the cable and re-design the real problem, remove the nylon bushes holding the fork ,machine out the holes and fit some sealed bearings