Phase 1 door cards into phase 3?

[underground375]

I did this to my ph1 when I did a ph3 conversion, The door card does need the pl2/3 central bracket and the upper bracket which if just under the window switch on the door card. The top bracket can be used, by getting 2 nuts used as spacers as the ph1 thread is much longer. I never put the later brackets on and the card its self still held ok. When it comes to the wiring there are old guides on the .net forms easily found using google search. As this is what I did. The left switch is easy to do but the drivers side takes a little working out.

This is how far I got once. As your is a ph3 you may have the problem I did when it come to them changing the colours.

http://www.theywhoshallnotbenamed/forum/...itch-looms