Iv got two here, the one i modified is just like the one in the photo, has got two yellow wires coming from the same point on the Pcb but one goes to the wire 112 (3rd pin) and the other goes to 112D (4th pin) but the clocks in my car only has one wire connecting to Wire 112 and wire 112D was in the plug but the other side of the plug(the clock side) had nothing to connect to,
Should i copy the original clocks and remove the pin and wire from the clocks that wire 112D would connect to?
If that makes sense?
Should i copy the original clocks and remove the pin and wire from the clocks that wire 112D would connect to?
If that makes sense?