Get some ebay gheto drift arches like pellowe had.
I gotta say I reckon if we can comfortably lower 80mm we could probably raise 80mm too with the right suspension combo. Could probably make some shock spacers out the bottom of some old shocks and the top of some old hubs welded together to space the bottom of the shock out then as said raise the torsion bars with longer shocks.
Really tempted to buy a tatty ph1 and do this actually.
Or that yeah, thats probably the most sensible way, box section between the beam and the floor and the sub frame and the floor.
I gotta say I reckon if we can comfortably lower 80mm we could probably raise 80mm too with the right suspension combo. Could probably make some shock spacers out the bottom of some old shocks and the top of some old hubs welded together to space the bottom of the shock out then as said raise the torsion bars with longer shocks.
Really tempted to buy a tatty ph1 and do this actually.
(15-12-2013, 07:55 PM)John1.4 Wrote: yeah that was the most simple way i thought of, any higher and the whole subframe, top and gearbox mounts, struts and rear beam would have to be spaced, essentially just raising the body by 4" or so..
Or that yeah, thats probably the most sensible way, box section between the beam and the floor and the sub frame and the floor.
