03-11-2013, 06:18 PM
Do you have a map you need uploading or do you need to buy and have a map uploaded?
For the uploading you'll need a lap top (or an extension lead to put your desktop in the car) and then buy a KWP2000+ tool off ebay, they are about £20 but dead easy to use.
For a map try http://www.gowhippy.com/ or http://www.hdi-tuning.co.uk/.
As for FMIC pipes it entirely depends on what intercooler you plan on using and if your keeping the air con or not. The usual route is a 41mm 90* long leg off the turbo into a 2.2HDi bottom pipe (i have one of these for sale) to bring you out at the front of the engine then for the top a 2.0 HDi 110 metal elbow off the inlet manifold and a oem rubber hose off that again to bring you over then engine. From there you will need appropriate pipes, hoses and clips to meet the intercooler.
For the uploading you'll need a lap top (or an extension lead to put your desktop in the car) and then buy a KWP2000+ tool off ebay, they are about £20 but dead easy to use.
For a map try http://www.gowhippy.com/ or http://www.hdi-tuning.co.uk/.
As for FMIC pipes it entirely depends on what intercooler you plan on using and if your keeping the air con or not. The usual route is a 41mm 90* long leg off the turbo into a 2.2HDi bottom pipe (i have one of these for sale) to bring you out at the front of the engine then for the top a 2.0 HDi 110 metal elbow off the inlet manifold and a oem rubber hose off that again to bring you over then engine. From there you will need appropriate pipes, hoses and clips to meet the intercooler.