28-10-2013, 11:06 PM
The intercooler is full of air there is nothing to drain. Its essentially a radiator for air.
3 6mm allen bolts along the top and maybe to 10mms hex heads hidden near the bottom front of the intercooler. Then 7mm hex for the jubilee clip and off it comes! Bear in mind you will probably need a new D seal about 4quid from pug. Either that or cut and blue hylomar your old one.
3 6mm allen bolts along the top and maybe to 10mms hex heads hidden near the bottom front of the intercooler. Then 7mm hex for the jubilee clip and off it comes! Bear in mind you will probably need a new D seal about 4quid from pug. Either that or cut and blue hylomar your old one.
Doesnt even own a 306.