Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gearbox input shaft bearing on the way out?
#1
Pls redirect to another thread if I've missed something;t I've spent the morning looking to see if this query might already have been answered on a different thread, but have drawn a blank.

Over the last year, my 306 HDi (168k miles) has developed a low-frequency resonant noise which:
  • Is related to engine speed rather than road speed;
  • Is absent when in neutral, irrespective of revs or whether vehicle moving;
  • Disappears when I dip the clutch;
  • Is noticeable in all gears;
  • Is most apparent at low revs - up to about 1250 rpm;
  • Is progressively getting worse, suggesting it could be wear-related.

It doesn't quite seem to fit the symptoms of a worn clutch release bearing - discussed elsewhere - but a bit of research, specifically http://www.fiatforum.com/punto-ii/158346...newal.html suggests it could be the gearbox input shaft bearing. Grateful for any thoughts; this has been a long time developing but don't want to be driving around with an iminent gearbox failure!

Thanks,

Jon.

[Edited to include correct link to Fiat Forum]
Reply
Thanks given by:


Messages In This Thread
Gearbox input shaft bearing on the way out? - by JonT - 13-10-2013, 12:43 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
Smile Advice and Input Needed :) JamesG 4 2,223 20-03-2013, 10:51 PM
Last Post: Poodle

Forum Jump:


Users browsing this thread: 1 Guest(s)