23-09-2013, 04:39 PM
(This post was last modified: 28-09-2013, 03:14 PM by londondan86.)
Due to now having 3 306's outside the house, the estate has to go.
MOT 08 July 2014
Tax 31 December 2013
Approx 140k
Bad bits first
Spares as the gearbox has died - Car still drives in all gears except 5th but I would recommend having it trailerd away.
There is also rust around the rear seat belt mount which would need a piece chopping out and welding in for next MOT
Crack on front bumper after the father in law drove it although I will include some correctly matching paint
Good bits
Engine is on a pro Steve S2 map making 152 bhp
FMIC
Gti6 flywheel/clutch conversion (no slip)
Boost at 22psi
Stainless full system from downpipe back to twin exit back boxes
Engine starts and drives spot on with no rattles bangs or other bad noises.
Lowered approx 50-60mm
'6 brakes at the front with drilled & grooved discs and Mintex pads
Wishbones and all front bushes changed in July before MOT
Only after £600 ono as it is
Optional Extras
Angel eye lights with 6k HID's - £70 (otherwise will come with crystals)
Grey challengers with loads of tread, 6-7mm - £150 (otherwise will come with white cyclones)
R70 fuel pump never fitted - £50
Bolt on gearbox mount TD04, bought cheap from a guy on here, needs some modifications to the up pipe to make the turbo sit at a better angle - £150
Project Thread
http://306oc.co.uk/forum/thread-10470.html
Car will be re-registered on its original 1999 plate as the "PUG" plate will be going on the beast!
Ill stick some up to date pics on there later when I can find the cable for my phone.
This is from FCS this year
MOT 08 July 2014
Tax 31 December 2013
Approx 140k
Bad bits first
Spares as the gearbox has died - Car still drives in all gears except 5th but I would recommend having it trailerd away.
There is also rust around the rear seat belt mount which would need a piece chopping out and welding in for next MOT
Crack on front bumper after the father in law drove it although I will include some correctly matching paint
Good bits
Engine is on a pro Steve S2 map making 152 bhp
FMIC
Gti6 flywheel/clutch conversion (no slip)
Boost at 22psi
Stainless full system from downpipe back to twin exit back boxes
Engine starts and drives spot on with no rattles bangs or other bad noises.
Lowered approx 50-60mm
'6 brakes at the front with drilled & grooved discs and Mintex pads
Wishbones and all front bushes changed in July before MOT
Only after £600 ono as it is
Optional Extras
Angel eye lights with 6k HID's - £70 (otherwise will come with crystals)
Grey challengers with loads of tread, 6-7mm - £150 (otherwise will come with white cyclones)
R70 fuel pump never fitted - £50
Bolt on gearbox mount TD04, bought cheap from a guy on here, needs some modifications to the up pipe to make the turbo sit at a better angle - £150
Project Thread
http://306oc.co.uk/forum/thread-10470.html
Car will be re-registered on its original 1999 plate as the "PUG" plate will be going on the beast!
Ill stick some up to date pics on there later when I can find the cable for my phone.
This is from FCS this year