Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Setting a stock idle on a modded pump!?
#6
(10-08-2013, 07:47 AM)306Puggy Wrote: Hello Anton. Thank you for the helpful reply. Yes I am running 100% veg at the moment. I have also had a play with the throttle splines. I have marked the arm roughly where I get a decent balance between startup and idle and I move the arm back and forth in relation to that. But it is hard to tell how much "one spline" is because they seem to be too fine to really judge. At the moment it seems okay but I am still having to press the throttle to smooth it out when I start it and then it still idles at about 1100RPM when warm. I just want to get it back so it starts normally and with a nice calm idle.

Think your best bet is to run your tank down throw 20quid worth of diesel in it then try setting up your idle then, as when you run veg your idle seems to be all over the place, i had same problem when i was running veg oil.

The arm on the back of the pump if you have your cold start cable on it, it pulls the leave when its cold bringing the revs up (if its set up right) i think your better having the cable connected for running veg so when you first start it up its reving up slightly.....

Thats my opinion anyway.



Reply
Thanks given by:


Messages In This Thread
RE: Setting a stock idle on a modded pump!? - by Chris_90 - 10-08-2013, 07:58 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  pistion advance setting of pump Bosch niciou 6 2,463 20-06-2016, 11:17 AM
Last Post: niciou
  Any tips for setting the pump up guys kev_boosted 5 1,453 05-11-2015, 09:07 PM
Last Post: kev_boosted
  Setting up a bosch pump bashbarnard 6 2,148 18-07-2014, 11:49 PM
Last Post: Martin306

Forum Jump:


Users browsing this thread: 2 Guest(s)