08-08-2013, 08:27 AM
(This post was last modified: 08-08-2013, 08:28 AM by kernow_joe.)
(08-08-2013, 08:18 AM)THE_Liam Wrote: Tried a hammer?
I was working on the car, silly question I think Liam!
(08-08-2013, 08:13 AM)Toms306 Wrote: I had this issue on the golf, and the 106, and one of the 306s lol.....if you lean the gun slightly to one side it gives it some pressure to work against (you'll feel/hear the impacts) holding it straight with no pressure off the car it will probably just spin.
Obviously be careful of the damaging the nut if you're re-using it. I also leave the spring under 'slight' tension to start it off so that gives some more pressure. Remember to compress it more when the nut is started though obviously lol.
compress the spring you say?
think I may be able to get access to a gun, will hopefully get it sorted and not kill my bank
![[Image: signiture.jpg]](https://lh4.googleusercontent.com/-7ORHe1luJy0/UIW7RcRdrGI/AAAAAAAABjE/n7i9b1goCYM/s500/signiture.jpg)
Midnightclub Wrote:All the cool kids have ph 2 Nile 6's!