Powerflex wishbone bushes...Email from Powerflex!

[titch]

I know in your previous posts you said you were using the grease supplied, but you don't get much i covered mine in copper slip. As you can see from the pic this is before i cleaned them up but you can see how much extra grease i had to use. I covered all the subframe attachment in grease both paint scrapers and then both faces of the bushes.

Using a g clamp like mentioned above might be worth a try, do the bushes fit into the wishbone ok with out the centre steel sleeve in them?
But yours don't seem to fit in the wishbone that well, i am sure when i fitted mine to the wishbone they didn't stick out as much as that, there was a little gap.