15-07-2013, 08:52 PM
I had this...although it was a prat of an officer.
anyway...
remove door card
remove window seal around window edge
remove sound deadening.
hoover/remove all the broken glass from inside the door, loocate the window securing clip its white/cream and square and may still be on the dowel on the window mechanism
slide in new window, about half way is easiest, then connect your window switch and put the locating dowel where the hole in the window is. pop the dowel through the hole in the window and put that square clip on and twist it.
put window rubbers back on...right PITA and fit all back up.
check the window works nice before putting door card back on etc!
anyway...
remove door card
remove window seal around window edge
remove sound deadening.
hoover/remove all the broken glass from inside the door, loocate the window securing clip its white/cream and square and may still be on the dowel on the window mechanism
slide in new window, about half way is easiest, then connect your window switch and put the locating dowel where the hole in the window is. pop the dowel through the hole in the window and put that square clip on and twist it.
put window rubbers back on...right PITA and fit all back up.
check the window works nice before putting door card back on etc!
Wishes for more power...