07-07-2013, 04:35 PM
Autoglym intensive tar remover will take the residue off without damaging paint.
Spraying is easy enough if you don't have to worry about the finish lasting. A light sanding with some 800 grit wet and dry, use it wet, dry the wheels then mask up with masking tape and newspaper then just blast with hammerite. 2 or 3 cans should do those wheels as they aren't multi spokes
Spraying is easy enough if you don't have to worry about the finish lasting. A light sanding with some 800 grit wet and dry, use it wet, dry the wheels then mask up with masking tape and newspaper then just blast with hammerite. 2 or 3 cans should do those wheels as they aren't multi spokes