10-02-2012, 03:09 PM
No sadly it dosent, the only way i think would be custom made coilover dampers with dropped drop link mounts proper short bodies and piston rods so insted of being -20mm - -70mm theyd be -50mm - -120mm.
Although custom might not be as hard as it sounds as shock bodies are probably universal size and if thats the same size as the hole on the 306 then your well in. You could even use the drop link mount as the stop on the shock body to save on the amount of welds needed.
Itd obv need some measuring and technical drawings but how hard can it be.
Although custom might not be as hard as it sounds as shock bodies are probably universal size and if thats the same size as the hole on the 306 then your well in. You could even use the drop link mount as the stop on the shock body to save on the amount of welds needed.
Itd obv need some measuring and technical drawings but how hard can it be.