MX5 turbo on the road again.......

[Fozzy]

Believe it or not this project is still going, has to be longest running project with very few changes but, the further i go the more i end up doing,.

What was going to be a drill the sump in situ turned into a remove the engine/ remove the sump, remove and uprate the clutch, changed some oil seals, replace bearing and slave cylinder, and clean all the muck off the engine.

Now its back in with a stage 3 clutch which should be good for 200bhp easy. Now all thats left is to fit the ecu and the panels.