11-04-2013, 09:05 PM
You sure it is the aircon, as i had the same on mine, the belt was vibrating between the between crank and ac pulley on idle, it turned out the manual tensioner was not tight enough and the noise was the spring loaded tensioner bouncing off it's stops.
I took the tension off the spring loaded one and re adjusted the manual one and all was good.
I think the last time i fitted a belt i didn't have the tension fully off the spring loaded one when i tensioned it with the manual one so it didn't go tight enough.
Worth a look
I took the tension off the spring loaded one and re adjusted the manual one and all was good.
I think the last time i fitted a belt i didn't have the tension fully off the spring loaded one when i tensioned it with the manual one so it didn't go tight enough.
Worth a look