regarding flashing
it depends on what system is fitted depending on what the light signals
if a bag is missing it might flash the airbag light or it might be constant
my system Ph3 with side bags
if a fault develops when driving the left airbag light flashes for a period then turns solid
if a bag is missing on switching ignition on the airbag light stays on (fails self check)
if i disable the pasanger airbag with a key the airbag light does normal self check but the right light stays solid lit
Kez has a stange fault ive been on with him for a couple of hours now
weve checked out
wiring to passanger bag
wiring to key switch
the key switch is not a switch! it changes a resistance state
switch on=400ohms
switch off=100ohms
he is now digging around for the airbag loom main earth point which is on the drivers B post at low level
it depends on what system is fitted depending on what the light signals
if a bag is missing it might flash the airbag light or it might be constant
my system Ph3 with side bags
if a fault develops when driving the left airbag light flashes for a period then turns solid
if a bag is missing on switching ignition on the airbag light stays on (fails self check)
if i disable the pasanger airbag with a key the airbag light does normal self check but the right light stays solid lit
Kez has a stange fault ive been on with him for a couple of hours now
weve checked out
wiring to passanger bag
wiring to key switch
the key switch is not a switch! it changes a resistance state
switch on=400ohms
switch off=100ohms
he is now digging around for the airbag loom main earth point which is on the drivers B post at low level