Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Timing issue
#23
Not quite epic fail. The locking hole was larger than the flywheel hole; I was using a too large of Allen key, slight fail on my part. But it's all together, cranks nicely. Will hopefully have it in tomorrow to seeing it can tick over
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:


Messages In This Thread
Timing issue - by ginge191 - 03-04-2013, 05:49 PM
RE: Timing issue - by darrenjlobb - 03-04-2013, 06:05 PM
RE: Timing issue - by ginge191 - 03-04-2013, 06:12 PM
RE: Timing issue - by darrenjlobb - 03-04-2013, 06:13 PM
RE: Timing issue - by ginge191 - 03-04-2013, 06:27 PM
RE: Timing issue - by darrenjlobb - 03-04-2013, 07:45 PM
RE: Timing issue - by ginge191 - 03-04-2013, 08:14 PM
RE: Timing issue - by darrenjlobb - 03-04-2013, 08:32 PM
RE: Timing issue - by ginge191 - 03-04-2013, 08:45 PM
RE: Timing issue - by darrenjlobb - 03-04-2013, 08:57 PM
RE: Timing issue - by ginge191 - 03-04-2013, 09:23 PM
RE: Timing issue - by Piggy - 04-04-2013, 06:00 AM
RE: Timing issue - by ginge191 - 04-04-2013, 06:14 AM
RE: Timing issue - by Piggy - 04-04-2013, 06:17 AM
RE: Timing issue - by Piggy - 04-04-2013, 06:48 AM
RE: Timing issue - by ginge191 - 04-04-2013, 07:08 AM
RE: Timing issue - by ginge191 - 04-04-2013, 10:43 AM
RE: Timing issue - by darrenjlobb - 04-04-2013, 12:43 PM
RE: Timing issue - by Piggy - 04-04-2013, 12:45 PM
RE: Timing issue - by ginge191 - 04-04-2013, 02:39 PM
RE: Timing issue - by darrenjlobb - 04-04-2013, 04:11 PM
RE: Timing issue - by Mattcheese31 - 04-04-2013, 05:30 PM
RE: Timing issue - by ginge191 - 04-04-2013, 05:45 PM
RE: Timing issue - by darrenjlobb - 04-04-2013, 05:46 PM
RE: Timing issue - by ginge191 - 04-04-2013, 05:55 PM
RE: Timing issue - by Piggy - 04-04-2013, 08:26 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Timing / Pump Issue macleod8901 6 2,322 06-03-2017, 08:54 AM
Last Post: darrenjlobb
  Possible timing issue post headgasket change?! Tom 22 4,250 23-07-2013, 09:34 AM
Last Post: padge

Forum Jump:


Users browsing this thread: 7 Guest(s)