Right, been out today again trying to solve this mystery. The plug comes off the loom running off the airbag module:
![[Image: P1010007_zps5efc4fbd.jpg]](http://i145.photobucket.com/albums/r233/Flynn_bucket/P1010007_zps5efc4fbd.jpg)
The plug comes off the loom and then the rest of the wires go into a hole in the dash presumably onto the driver's side.
Edit: Right, as it turns out, the passenger's side plug was a red herring. I can only assume it was put there on phase 1's incase a passenger's side airbag was origionally gonna be an optional extra on phase 1's.
It was necessary to unplug and replug the airbag module to reset it and therefore stop the airbag light from staying on, I'm guessing disconnecting the battery isn't enough. Now all I need to do is get the steering wheel on straight before I put everything back again, any tips?
The plug comes off the loom and then the rest of the wires go into a hole in the dash presumably onto the driver's side.
Edit: Right, as it turns out, the passenger's side plug was a red herring. I can only assume it was put there on phase 1's incase a passenger's side airbag was origionally gonna be an optional extra on phase 1's.
It was necessary to unplug and replug the airbag module to reset it and therefore stop the airbag light from staying on, I'm guessing disconnecting the battery isn't enough. Now all I need to do is get the steering wheel on straight before I put everything back again, any tips?
