Trip Computer Guide (HDI)

[cully]

Yes, it's pin 63 for ECU Bosch EDC15C2 but with one plug (K-line)




ONLY ! I don't think it's available for the latest ECU provided with the 306 (2001 last models) with has 3 plugs (Can).

are you sure pin 63 as i believe K-line is 38 ?????

   
Channel No. Description
1 +12 volts supply (after double relay)
2 Output:control of injector N° 1
3 Output:control of injector N° 3
4 Output:control of injector N° 4
5 Output:control of injector N° 2
6 Output:control of injector N° 2
7 ---
8 Diagnostic line for the coils of the fan unit control relays
9 ---
10 Diagnostic line l
11 Input:air temperature sensor (flowmeter)
12 5 volt outputensor supply
13 Input:air flow signal (flowmeter)
14 Input:engine speed sensor signal
15 Input:accelerator pedal sensor signal
16 ---
17 ---
18 Input:camshaft sensor signal
19 Input:vehicle speed (vehicle speed sensor)
20 ---
21-22 ---
23 Output:engine coolant temperature information (gauge and warning lamp in the instrument panel)
24 ---
25 Output:control of fan unit group 1
26 Output:boost pressure regulation electrovalve
27 Earth:air conditioning pressostat
28 ---
29 +12 volts supply (after double relay)
30 Output:control of injector N° 1
31 Output:control of injector N° 3
32 Output:control of injector N° 4
33 Earth
34 Sensors earth
35 ---
36 Engine immobiliser serial line
37 ---
38 Diagnostic line k
39 Input:fuel temperature sensor
40 Earth
41 Input:engine speed sensor signal
42-43 ---
44 Power supply to sensors (5 volts)
45 Earth:water temperature sensor
46 Input:engine coolant temperature information
47 Input:air conditioning on information (AC/ON)
48 Inputtop lamp switch connection
49 Earth
50 Input:fuel pressure information
51 Earth
52 Output:recycling electrovalve control (EGR)
53 Earth
54-55 ---
56 Output:preheating warning lamp
57 ---
58 Output 1:control of additional heating 1
59-60 ---
61 ---
62 Output:engine speed to instrument panel
63 Output:fuel consumption at any moment (trip computer)
64 Input:accelerator pedal sensor
65 ---
66 Input:wake up for injection ECU, wake up for ADC
67 Output:control for preheating unit
68 Input:accelerator pedal sensor
69 After ignition +
70 Input:catalytic converter temperature
71 Input:inlet manifold air pressure
72 ---
73 Input:unused brake switch
74 Input:fuel pressure
75 Air conditioning pressostat (26 bar control stage)
76-79 ---
80 Output:deactivator of the 3rd piston of the high pressure fuel pump
81 Output:engine coolant temperature information (instrument panel)
82 Output:diagnostic warning lamp (instrument panel)
83 Output:control of fan unit group 2
84 Output:air conditioning compressor control
85 Output 2:control of additional heating 2
86 Output:double relay control
87 Output:double relay control
88 Output:control for preheating unit




also is this any help for the 3 plug???