(04-03-2013, 09:31 PM)silverzx Wrote: You got any pictures Ginge?
I've got a 306 alternator setup but can't see it fitting it honesty.
Also I don't know of any XUDs that came without PAS. So the XUD9 alternator would connect to the crank and the tensioner, I don't know of any belts that size?
Any more info Ginge? Cheers..
On my 1.9 block, it has 2 seperate aux belts with the PAS at the back and the alternator at the front . The crank pulley has an extra pulley attached to run a seperate pump. Does this make sense? So when I come to putting the 1.9 lump in I just disconnect the surplus pulley and pump. I'll try and find some pics
ah here we go, the only side on picture i have on file
Yellow - Alternator drive
Blue - PAS drive.
Notice the extra pulley on the crank end, that's heald in with 4 torx bolts, whipe that of and i'm left with the alternator alone, the alternator setup is the same as my 1.8, and could almost guarantee it's the same as your DT setup
Diablo Hdi Dturbo and 205 1.9 project - it lives!