23-02-2013, 11:23 AM
(23-02-2013, 11:05 AM)cwspellowe Wrote: The GT2056 clears the bulkhead fine but I smashed it out the way just in case. Oil lines i'm using a braided feed connected to the standard T2 line with an AN fitting, and the return just about fits with a bit of extra rubber hose on the end of it.
The fitting from the vans comes with a triangular manifold flange so just drilled and tapped the manifold to suit. Gasket matched the hotside inlet, and used a 10mm steel plate with 2.5" elbow welded to it for the downpipe.
Sounds simple thinking of not bothering with the td04 and going for a better turbo like these
