09-02-2013, 10:54 AM
You'll need (IMO):
New inlet/exhaust gasket.
New D-Seal
Length of pipe for oil return - make sure the turbo comes with a drain pipe...
Exhaust elbow gasket if you're keeping with the OEM elbow.
Coolant - for if you decide you need to pull off the heater matrix pipe on the right hand side of the head to wiggle the turbo past...
Custom air intake pipe if you plan on using a filter - I run defiltered but would always recommend anyone uses a filter.
Then obviously adapter plates, turbo and the oil line.
New inlet/exhaust gasket.
New D-Seal
Length of pipe for oil return - make sure the turbo comes with a drain pipe...
Exhaust elbow gasket if you're keeping with the OEM elbow.
Coolant - for if you decide you need to pull off the heater matrix pipe on the right hand side of the head to wiggle the turbo past...
Custom air intake pipe if you plan on using a filter - I run defiltered but would always recommend anyone uses a filter.
Then obviously adapter plates, turbo and the oil line.
