07-02-2013, 07:52 PM
(This post was last modified: 07-02-2013, 08:18 PM by strictly_perv.)
Hi all, I've been looking into making up a 2.5 inch mild steel exhaust system from JCC which will cost around £50 for turbo to back box.
The plan would be to join it onto my new turbo downpipe which currently has a 2.5-2 inch reducer but that will be cut down. So am I right in thinking I will need a 45deg bend to clear the bulk head, 1m straight pipe then another 45 deg bend to go towards the bumper cut out? Then get some sort of back box fitted on (or maybe no box
)
The plan would be to join it onto my new turbo downpipe which currently has a 2.5-2 inch reducer but that will be cut down. So am I right in thinking I will need a 45deg bend to clear the bulk head, 1m straight pipe then another 45 deg bend to go towards the bumper cut out? Then get some sort of back box fitted on (or maybe no box
)
Stage 2 XUD Sedan