I'll give you a few pointers mate.
To front mount you need a 406 inlet elbow and a c5 HDI lower pipe, and a 41mm to 45mm legged bend to go onto the Turbo, although some folk have used different pipes. Then you need some piping and silicone joins.
Check some of the threads on here for routing. There are a few awkward parts to the job. Your best taking the air con out, removing the standard Turbo pipe is a pita (I cut mine out).
You'll also need a uprated clutch. You may want to blank off the egr whilst the elbows off, and forget the chip, your best getting a remap, do some research in the HDI section. You will easily work out what you want to do
Arron
To front mount you need a 406 inlet elbow and a c5 HDI lower pipe, and a 41mm to 45mm legged bend to go onto the Turbo, although some folk have used different pipes. Then you need some piping and silicone joins.
Check some of the threads on here for routing. There are a few awkward parts to the job. Your best taking the air con out, removing the standard Turbo pipe is a pita (I cut mine out).
You'll also need a uprated clutch. You may want to blank off the egr whilst the elbows off, and forget the chip, your best getting a remap, do some research in the HDI section. You will easily work out what you want to do
Arron