Foobys' I'll fix your internet thread'

[burnmw]

Right, this is nearly 10minutes after switching the phone line from Master to Test...

Configured Current
Line Status --- SHOWTIME
Link Type --- Fast Path
Operation Mode Automatic G992.5(ADSL2+)

Data Rate Information
Stream Type Actual Data Rate
Upstream 915 (Kbps.)
Downstream 759 (Kbps.)

Defect/Failure Indication
Operation Data Upstream Downstream
Noise Margin 5.4 dB 6.1 dB
Line Attenuation 38.2 dB 61.0 dB

Indicator Name Near End Indicator Far End Indicator
Output Power 12.6 dBm 0.0 dBm
Fast Path FEC Correction 0 0
Interleaved Path FEC Correction NA NA
Fast Path CRC Error 13 16
Interleaved Path CRC Error NA NA
Loss of Signal Defect 1 0
Fast Path HEC Error STR 7 14
Interleaved Path HEC Error NA NA
Error Seconds 25221 7529

Statistics
Received Cells 153050
Transmitted Cells 96727

Can't find a way to switch it from "Fast Path" to "Interleaved" though, any ideas where I should be looking?