01-01-2013, 12:59 PM
cool
now your going to test the resistor
turn the ignition off
unplug the resistor
set your meter to ohms
touch both ends of the probs together meter should read 0/zero ohms or very close
on the resistor you should be able to see pin numbers if you have good eyesight
measure the resistance from pin4 on the resistor to pin 6 you should get a reading
them measure between
4-5
4-1
4-2
each reading should get less than the first reading you took at 4-6
now your going to test the resistor
turn the ignition off
unplug the resistor
set your meter to ohms
touch both ends of the probs together meter should read 0/zero ohms or very close
on the resistor you should be able to see pin numbers if you have good eyesight
measure the resistance from pin4 on the resistor to pin 6 you should get a reading
them measure between
4-5
4-1
4-2
each reading should get less than the first reading you took at 4-6