Ph1 immobiliser by pass

[ozonehostile]

the immobilizer is connected to the stop solenoid on the pump yes, either you can just swap the pump and solenoid wiring over from your old car or if you cant be bothered you can disable the keypad immobilizer by replacing the 4 wire (immobilizer type) solenoid with a single wire actuator type (with live feed to ignition). i would recommend just swapping the pump over from the engine that matches the keypad though, as to change the solenoid you would either have to dismantle the pump or very carefully grind off the metal housing around the solenoid.