20-12-2012, 07:16 PM
Door cards all fit, including the locking pins etc. make sure you get all the brackets from a ph2 or 3 car to hang the new cards on and I also think you need to drill a new hole in the front doors for one of the brackets.
Someone on .net cough cough did a guide to the swap.
Final tip is make sure you have enough wire from the new switches so you can stagger all the joins or you will have a large cluster of joined wires and the door card may not sit flush.
Someone on .net cough cough did a guide to the swap.
Final tip is make sure you have enough wire from the new switches so you can stagger all the joins or you will have a large cluster of joined wires and the door card may not sit flush.