16-12-2012, 02:40 PM
Yeah mate cut it out like so
Rough up the back with the dremel
Masking tape over the painted side
Turn upside down
Fibreglass the shit out of it
Rip off masking tape
Sand down so all the fibreglass sits lower than the painted surface
Fill with filler
Sand smooth
Primer
Paint
Lacquer
Job done
Rough up the back with the dremel
Masking tape over the painted side
Turn upside down
Fibreglass the shit out of it
Rip off masking tape
Sand down so all the fibreglass sits lower than the painted surface
Fill with filler
Sand smooth
Primer
Paint
Lacquer
Job done