GTF Back on topic kids...
Build (ish) is going well.
Waiting on Cambelt and Inlet/exhaust manifold gasket to turn up so i can get the remaining bits done.
9mm bosch and injectors fitted, had to use an old lucas pipe for injector 2 (from the gearbox), Also had to take the angle grinder to the sump so i could use the non-aircon xud9 alternator and PS bracketry, minor.
Drilled hole in the block (rear, flywheel bit) for the engine speed sensor. Also had to file down the bosch pump bracket a smidge.
Few things to adress RE rear coolant/matrix pipes, oh and fitting the xud9 loom. Should be done with my half afternoon 2moro and thursday all day.
Pictures on my facebook, they're from in the workshop which is quite dark at the back. Sure dumdum could nick it off my FB and upload here if he wants.
Build (ish) is going well.
Waiting on Cambelt and Inlet/exhaust manifold gasket to turn up so i can get the remaining bits done.
9mm bosch and injectors fitted, had to use an old lucas pipe for injector 2 (from the gearbox), Also had to take the angle grinder to the sump so i could use the non-aircon xud9 alternator and PS bracketry, minor.
Drilled hole in the block (rear, flywheel bit) for the engine speed sensor. Also had to file down the bosch pump bracket a smidge.
Few things to adress RE rear coolant/matrix pipes, oh and fitting the xud9 loom. Should be done with my half afternoon 2moro and thursday all day.
Pictures on my facebook, they're from in the workshop which is quite dark at the back. Sure dumdum could nick it off my FB and upload here if he wants.
![[Image: KrisB-new-Logo11.gif]](http://i568.photobucket.com/albums/ss125/kris306dt2009/Work/KrisB-new-Logo11.gif){kind=logo}