09-11-2012, 04:39 PM
I had the same problem when I did mine. Short answer is there isn't really one from what I could see and was told by people. There are too many wire/pin combinations depending on car age/model/whats in the door.
My advice [what I did] is to cut the wires individually, test which pin they go to with a multimeter, and join to the new connector as you go. If you've brought the replacement door loom [6542.VQ] the cables are numbered 1 to 23 relating to which pin the wire is. Hope that helps.
My advice [what I did] is to cut the wires individually, test which pin they go to with a multimeter, and join to the new connector as you go. If you've brought the replacement door loom [6542.VQ] the cables are numbered 1 to 23 relating to which pin the wire is. Hope that helps.