09-11-2012, 08:09 AM
There's a full guide on .net.... and here I believe
The parts you will definitely need are:
406 inlet adapter
C5 or 406 HDI Turbo pipe (I'd go c5)
A 41 to 45 mm 90 degree bend for the Turbo
The rest depends on your budget and how you fancy routing it
Id imagine you'll need to remove the air con to route anything down the drivers side of the rad.
You can ask for the egr to be disabled on your stage 2 map. I disconnected on a stage 1 and ran a egr blank from eBay. The car felt fine but it does record a silent
Fault in the ecu (you won't get an ecu light)
You may also need a clutch come stage 2.
Hope this helps
The parts you will definitely need are:
406 inlet adapter
C5 or 406 HDI Turbo pipe (I'd go c5)
A 41 to 45 mm 90 degree bend for the Turbo
The rest depends on your budget and how you fancy routing it
Id imagine you'll need to remove the air con to route anything down the drivers side of the rad.
You can ask for the egr to be disabled on your stage 2 map. I disconnected on a stage 1 and ran a egr blank from eBay. The car felt fine but it does record a silent
Fault in the ecu (you won't get an ecu light)
You may also need a clutch come stage 2.
Hope this helps