Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2.1 conversion done........
#32
Plenty of people about running 12mm pumps, not much need on an IDI with hose pipe injectors as stock, can give gains at few rpm areas, but generally just ruin the advance system a bit more / put in rediculasly un-nessercery ammounts of fuel off boost!

Different story with DI and higher injection pressure though, struggle to get decent fuel flow with anything less!

The only reason people wanna know about the turbo is because the picture is just everything an 18g isnt....stock housing, WITH stepdown....18g wheel wouldnt fit inducer wise without the stepdown, let alone with....
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Thanks given by:


Messages In This Thread
2.1 conversion done........ - by Mountie66 - 09-10-2012, 03:44 PM
RE: 2.1 conversion done........ - by spike2002 - 09-10-2012, 03:48 PM
RE: 2.1 conversion done........ - by Mountie66 - 09-10-2012, 04:08 PM
RE: 2.1 conversion done........ - by bayley - 09-10-2012, 05:37 PM
RE: 2.1 conversion done........ - by Ruan - 09-10-2012, 04:54 PM
RE: 2.1 conversion done........ - by Mountie66 - 09-10-2012, 04:56 PM
RE: 2.1 conversion done........ - by Ruan - 09-10-2012, 05:03 PM
RE: 2.1 conversion done........ - by Dave - 09-10-2012, 05:14 PM
2.1 conversion done........ - by kentiiboii - 09-10-2012, 05:18 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 06:26 PM
RE: 2.1 conversion done........ - by Mountie66 - 09-10-2012, 06:54 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 07:10 PM
RE: 2.1 conversion done........ - by Ruan - 09-10-2012, 07:12 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 07:16 PM
Re: 2.1 conversion done........ - by Alee83 - 09-10-2012, 07:54 PM
RE: 2.1 conversion done........ - by THE_Liam - 09-10-2012, 07:55 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 08:10 PM
RE: 2.1 conversion done........ - by Mountie66 - 09-10-2012, 08:40 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 08:14 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 08:23 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 08:33 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 08:35 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 08:43 PM
RE: 2.1 conversion done........ - by Mountie66 - 09-10-2012, 08:53 PM
Re: 2.1 conversion done........ - by Dan! - 09-10-2012, 09:14 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 09:16 PM
Re: 2.1 conversion done........ - by kernow_joe - 09-10-2012, 09:24 PM
RE: 2.1 conversion done........ - by CJ_Derv - 09-10-2012, 09:28 PM
Re: RE: 2.1 conversion done........ - by Dan! - 09-10-2012, 09:29 PM
RE: 2.1 conversion done........ - by darrenjlobb - 09-10-2012, 09:34 PM
2.1 conversion done........ - by Jake - 09-10-2012, 09:36 PM
RE: 2.1 conversion done........ - by Pugmarshall - 10-10-2012, 09:42 AM
RE: 2.1 conversion done........ - by Ruan - 10-10-2012, 10:38 AM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 01:44 PM
Re: 2.1 conversion done........ - by Dan! - 10-10-2012, 01:54 PM
RE: 2.1 conversion done........ - by Scott - 10-10-2012, 02:04 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 02:24 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 02:31 PM
RE: 2.1 conversion done........ - by ginge191 - 10-10-2012, 02:35 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 02:35 PM
RE: 2.1 conversion done........ - by PUGMON - 10-10-2012, 02:47 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 02:49 PM
RE: 2.1 conversion done........ - by Curt - 10-10-2012, 02:50 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 03:00 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 02:52 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 02:55 PM
RE: 2.1 conversion done........ - by ginge191 - 10-10-2012, 02:56 PM
Re: RE: 2.1 conversion done........ - by Dan! - 10-10-2012, 03:00 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 03:05 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 03:00 PM
RE: 2.1 conversion done........ - by ginge191 - 10-10-2012, 03:02 PM
RE: 2.1 conversion done........ - by Curt - 10-10-2012, 03:04 PM
RE: 2.1 conversion done........ - by bealey - 10-10-2012, 03:11 PM
2.1 conversion done........ - by Jake - 10-10-2012, 03:17 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 03:18 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 03:29 PM
RE: 2.1 conversion done........ - by Curt - 10-10-2012, 03:23 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 03:34 PM
RE: 2.1 conversion done........ - by lolsteve - 10-10-2012, 03:24 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 03:32 PM
RE: 2.1 conversion done........ - by Mattcheese31 - 10-10-2012, 03:32 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 03:48 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 03:54 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:01 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:02 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:21 PM
RE: 2.1 conversion done........ - by Scott - 10-10-2012, 04:03 PM
RE: 2.1 conversion done........ - by cwspellowe - 10-10-2012, 04:12 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:21 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:24 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 04:21 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:29 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:36 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 04:30 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:30 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 04:35 PM
RE: 2.1 conversion done........ - by Scott - 10-10-2012, 04:39 PM
RE: 2.1 conversion done........ - by Mattcheese31 - 10-10-2012, 04:40 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:41 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:44 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 04:44 PM
RE: 2.1 conversion done........ - by Mattcheese31 - 10-10-2012, 04:49 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 04:49 PM
RE: 2.1 conversion done........ - by PUGMON - 10-10-2012, 04:49 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 04:52 PM
RE: 2.1 conversion done........ - by Mattcheese31 - 10-10-2012, 04:53 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 04:55 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 05:00 PM
RE: 2.1 conversion done........ - by Pugmarshall - 10-10-2012, 05:04 PM
RE: 2.1 conversion done........ - by Mountie66 - 10-10-2012, 05:12 PM
RE: 2.1 conversion done........ - by Pugmarshall - 10-10-2012, 05:24 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 05:04 PM
2.1 conversion done........ - by Jake - 10-10-2012, 05:05 PM
RE: 2.1 conversion done........ - by Mattcheese31 - 10-10-2012, 05:07 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 05:07 PM
RE: 2.1 conversion done........ - by the milkman - 10-10-2012, 05:09 PM
2.1 conversion done........ - by Jake - 10-10-2012, 05:10 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 05:13 PM
RE: 2.1 conversion done........ - by darrenjlobb - 10-10-2012, 05:13 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 05:17 PM
RE: 2.1 conversion done........ - by CJ_Derv - 10-10-2012, 05:18 PM
RE: 2.1 conversion done........ - by Dum-Dum - 10-10-2012, 06:12 PM

Forum Jump:


Users browsing this thread: 19 Guest(s)