When running on pp the rail pressure ramps up then cuuts out at double the requested value. This is when sitting at idel.
Also the only code logged on pp is that the fpr is jamming, but it does it regardless of the regulator fitted ( although it'll run fine without logging a code for a while after its been changed)
Also a new ecu has been tested with a original map on and the issue is still there.
Also the only code logged on pp is that the fpr is jamming, but it does it regardless of the regulator fitted ( although it'll run fine without logging a code for a while after its been changed)
Also a new ecu has been tested with a original map on and the issue is still there.
![[Image: sig.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/sig.jpg)