masked lights

[puglove]

Noooo they are ok! Oven at 120 for 10 mins screw driver in the bottom to leaver it out. Get you fingers in there and pull the lens of gentaly.

I done another set last night. Took me the whole of 2mins per light once they were up to temp

How do you go about putting them back together/resealing them? Might do my own if I can acquire a decent set from the scrappy.

Clean the joint out. Wack a shed load of black/clear mastic in there. Put then back togeter with 2 bungy straps round it to hold it togeter whilst it drys. Then us a rag with whie spirt to clean off excess and tidy it up. Simples. Warter/air tight and dosnt even look like they have been apart