Bosch pump max fuel and idle settings issue

[studturbo]

I found out why there is no haze of coal on boost, because the boost was going up as the fuelling was turned up. I remember Ruan saying something back in the .net days about the wastegate on the K14 not working beyond 19psi? That must have been what has happened here. I thought I had it restricted to 19psi by the wastegate but it was the fuelling that was keeping it at 19, when I turned the fuelling up more (today) it was hitting 24psi! That explains why I failed to get obtain a higher fuel to air ratio. Not where I want to be! Looks like I will have to get back underneath and get oil from the sump on my face again! I want to get the most out of a setup on a moderate boost level and gov mod, that will do me until I setup a front mount. LondonDan86 I chucked away that plastic washer by the way and rotated the LDA pin, at least I think, it was hard to tell which side was more severe. I hope the gov mod is that easy!

the gov mod is just fiddly i broke a cradle putting it back together and i shimmed it 5mm and now it pulls very well just be gently and dont be rough with the gov mod i made that mastake