05-08-2012, 10:47 AM
Depends on the coilovers some start at OE hight some at -20mm some at -30mm ect.
No you will not need compressers they will just winde up and down as they are. And i would start some whete in the middle then adjust up or down from there rather than at the top. But you should take them apart and wire brush them 1st 1st. And just use stilsons if your 2 tight to spend an extra £4 but you will wrech the spring seats by doing it like that. Especialy if they are tight
No you will not need compressers they will just winde up and down as they are. And i would start some whete in the middle then adjust up or down from there rather than at the top. But you should take them apart and wire brush them 1st 1st. And just use stilsons if your 2 tight to spend an extra £4 but you will wrech the spring seats by doing it like that. Especialy if they are tight
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
Member of 99% warning or your nothing club!